Hot-coating is the application of a thin layer of epoxy over the lamination to provide a smooth surface final surface. Because surfboard hot coats are sanded to achieve their final finish they must be thick enough so as to not damage the underlying fiberglass in the lamination layer. As such, fill coating can be applied after a wet layup lamination to help fill the texture of the cloth and provide a smoother surface on which to hot coat. Fill coats are commonly applied when the lamination surface has gelled but is still tacky. This allows for the fill coat to better adhere to the lamination surface and hold in place.
Learn more about applying fiberglass.
Steps for Hot-Coating
Mask the rail of the surfboard with tape to prevent any drips. Tape should be removed before the epoxy fully cures.
Note: If the previously applied epoxy has cured. Remove the blush and prep the surface for new epoxy.
Tap the bristles of a chip or paint (~3” wide) brush against masking tape to remove any bristles that could fall into the coating.
Mix a batch of epoxy and pour down the middle of the board. Use the brush to spread it evenly over the surface working out to the rails then working from tip to tail. Avoid overworking the epoxy with a brush to minimize the chance of entrapping air bubbles in the coating.
Repeat the process alternating the direction in which you spread the epoxy with the brush (45 degrees to the stringer) to create an evenly coated surface.
Give the epoxy time to self-level and cure to achieve a smooth, glossy finish.
Wooden Surfboard Hot-coat Tutorial
With Grain Surfboards
Wooden surfboard laminating and hot coating using Entropy Resins’ Super Sap CLR epoxy resin over a Grain Surfboard
Entropy Resins Products
Entropy Resins’ coating and laminating epoxies are Super Sap® Formulations. Designed for versatility, they can be used in a wide range of applications from laminating fiber-reinforced composites to thin film coatings. Featuring simple 2:1 mix ratios and a variety of cure speeds, they are engineered for ease of use. Superior strength, excellent adhesion to many surfaces, industry-leading clarity, and UV epoxy stability make these epoxies the right choice for coating and laminating projects.
Hot Coating Surfboards
Privacy & Cookies Policy
Necessary cookies are absolutely essential for the website to function properly. This category only includes cookies that ensures basic functionalities and security features of the website. These cookies do not store any personal information.
Any cookies that may not be particularly necessary for the website to function and is used specifically to collect user personal data via analytics, ads, other embedded contents are termed as non-necessary cookies. It is mandatory to procure user consent prior to running these cookies on your website.